Gennex 3kW/60A Solar Charge Controller with combined MPPT technology and DSP controller converts best voltage to charge battery based on various temperature.
Compared to traditional solar charge controllers, it allows your solar panels to operate at their optimum power output voltage, providing higher efficiency up to 98% with lower power loss.
[bctt tweet=”Compared to traditional solar charge controllers, it allows your solar panels to operate at their optimum power output voltage, providing higher efficiency up to 98% with lower power loss.”]
When integrated with inverter, solar panel(s), and external battery packs, it can become a standalone solar power system to generate green power for your home appliances.
A standalone power system
The Gennex MPPT Solar Charge Controller will convert solar power to charge external batteries and then provide power to home appliances via inverter.
Input
| Specification | |
|---|---|
| MPPT Range @ Operating Voltage | 60 VDC ~ 115 VDC |
| Maximum PV Array Open Circuit Voltage | 145VDC |
| Maximum PV Array Power | 800W | 1600W | 3200W |
| Maximum Current | 50A |
[bctt tweet=”When integrated with inverter, solar panel(s), and external battery packs, it can become a standalone solar power system to generate green power for your home appliances.”]
| Specification | |
|---|---|
| Nominal Voltage | 12 VDC | 24 VDC | 48 VDC |
| Connected Battery Type | Sealed lead acid, AGM or Gel |
| Maximum Charging Current | 60A |
| Maximum Efficiency | 98% |
| Charging Method | Three stages: bulk, absorption, and floating |
Protection
| Specification | |
|---|---|
| Overload Protection | >110%; audible alarm |
| Overcharge Protection | Yes |
| Polarity Reversal Protection @ Solar Cell & Battery | Yes |
Indicators
| Specification | |
|---|---|
| LCD Panel | LCD panel indicating solar power, load level, battery voltage/capacity, charging current, and fault conditions |
| LED Display | Three indicators for solar, charging, and load status |
Physical
| Specification | |
|---|---|
| Dimension, D x W x H (mm) | 315 x 165 x 128 |
| Net Weight (kgs) | 4.5 |
| IP Protection | IP 31 |
Environment
| Specification | |
|---|---|
| Humidity | 5 ~ 95% RH (Non-condensing) |
| Operating Temperature | 0°C to 55°C |
| Storage Temperature | -15°C to 60°C |
| Altitude | 0 ~ 3000 m |
Full Specification Sheet
Download full datasheet for the Gennex 3kW/60A MPPT Solar Charge Controller here.
Price
Before now, the charge controller sold for 80,000 naira.
As at today, Gennex 3kW/60A MPPT Solar Charge Controller costs 70,000 naira.
Contact 08171936361, 012934490 or visit our office to buy the Gennex 3kW/60A MPPT Solar Charge Controller.
Good day engineers in d house pls I want to asked if I can use Dis 3kw/60A to charge only one 200AH battery d system is 12 volts. If yes how many panel will u advise me to use bcus am already secure with 2 pieces 250watt and 1piece 150watt as well which Ve connected It together in parallel. Is there any bad effect on d battery, charge controller or d solar panels. Likewise I want to know d price place aboved is negotiable. Plz reply all my questions pls I need a professional answer. Thanks
Hello Sir/Madam,
I want to buy Gennex 3kW/60A MPPT Solar Charge Controller. How much is the final price and transportation to Eket in Akwa Ibom State?
Regards.
Gregory Nkem
Hello sir
kindly give me your phone number sir to clarify the details.
Pls I want to know if this 60amp mppt charge controller is suitable for my 8 units of 250watts panel plus 3 units of 300 watts panel all combined
yes it can. The charge controller Is 3000W 60A.
You can call us on 08091023041 for more details.
it depends on your configuration is it 12vdc, 24vdc or 48vdc because the maximum you can go is 3kw(3000W) on the 60A and that’s if you’re on the 48vdc configuration and 3kw PV panel will equate to12 PV panel at 250W per panel. I don’t personally advice using different PV panel mixture.