Gennex 5kVA/48V (4000W) hybrid inverter is a pure sine wave inverter with an output power factor of 1 (p.f. = 1) i.e. 5kVA = 5kW . This simply means this 5kVA system has the capacity to accommodate more loads than its counterparts with a power factor of 0.8.
Like other Gennex Inverters models, it is built in an anti-dust kit for harsh environments and also features a battery equalization function to optimize battery performance and extend life-cycle.
READ ALSO: Product Feature : Gennex 2kVA/24V (600W MPPT) Hybrid Inverter
READ ALSO: Product Feature : Gennex 2kVA/24V (1500W MPPT) Hybrid Inverter
READ ALSO: Product Feature : Gennex 3kVA / 24V (600W MPPT) Hybrid Inverter
[bctt tweet=”Like other Gennex Inverters models, it is built in an anti-dust kit for harsh environments and also features a battery equalization function to optimize battery performance and extend life-cycle.”]
The 5kVA/48V (4000W MPPT) Hybrid Inverter comes in two forms:
5kVA/48V PAR-A
This model comes without a parallel kit. It finds its application in installations that don’t envision expansion anytime soon. As at today (06/03/19), the PAR-A model goes for 252,000 naira only.
2. 5kVA/48V PAR-B
This model comes with a parallel kit. The parallel kit consists of the following:
- The Parallel board
- Parallel communication cable
- Current sharing cable
The parallel kit makes it possible for the inverter to be used in parallel with two different operation modes:
- Parallel operation in single phase with up to 6 units. The supported maximum output power is 24KW/30KVA.
- Maximum six units work together to support three-phase equipment. Four units support one phase
maximum. The supported maximum output power is 24KW/30KVA and one phase can be up to 16KW/20KVA.
[bctt tweet=”The parallel kit makes it possible for the inverter to be used in parallel with two different operation modes”]
Check out complete specification of the 5kVA/48V hybrid inverter:
Download full datasheet for the Gennex 5kVA/48V (4000W MPPT) Hybrid Inverter.
Mechanical Data
PHYSICAL
Dimension, D x W x H (mm) | 120 x 295 x 468 |
Net Weight (kgs) | 13.5 |
Communication interface | USB/RS232 |
ENVIRONMENT
Humidity | 5% to 95% Relative Humidity (Non-condensing) |
Operating Temperature | -10°C to 50°C |
Storage Temperature | -15°C to 60°C |
Electrical Data
INPUT
Voltage | 230VAC |
Selectable Voltage Range | 170-280 VAC (For Personal Computers); 90-280 VAC (For Home Appliances) |
Frequency Range | 50 Hz/60 Hz (Auto sensing) |
OUTPUT
AC Voltage Regulation (Batt. Mode) | 230VAC ± 5% |
Surge Power | 10000VA |
Efficiency (Peak) | 90% ~ 93% |
Transfer Time | 10 ms (For Personal Computers) ; 20 ms (For Home Appliances) |
Waveform | Pure sine wave |
BATTERY
Battery Voltage | 48 VDC |
Floating Charge Voltage | 54 VDC |
Overcharge Protection | 63 VDC |
SOLAR CHARGER & AC CHARGER
Maximum PV Array Power | 4000W |
MPPT Range @ Operating Voltage | 60 VDC ~ 115 VDC |
Maximum PV Array Open Circuit Voltage | 145 VDC |
Maximum Solar Charge Current | 80A |
Maximum AC Charge Current | 60A |
Maximum Charge Current | 140A |
Full Specification Sheet
Download full datasheet for the Gennex 5kVA/48V (4000W MPPT) Hybrid Inverter here.
Price
Gennex 5kVA/48V(4000W) PAR-A Hybrid Inverter as at March 2019 sells for 252,000 naira while the PAR-B model goes for 270,000 naira.
To get any of the two models, call 08091023041, 08171936361 or send a message on WhatsApp.
Could i use this model Gennex 5kVA/48V(4000W) PAR-A with the same model in parallel or not?
Yes you can sir
How many watts of solar panels can it support.
It supports up to an array of 4000W solar panels
Hello, I have your 5kva 48v inverter but my engineer says it can only accommodate 4 batteries, if I want to increase the batteries to 8 then I need to get a charge controller. Is this true
Hello ma
Thank you for contacting gennex technologies.
Based on your enquiry, the 5KVA 48V inverter can work with 4 batteries of 12V 200AH in series in connection with another set of 4 batteries (12V 200AH) in series making 8 batteries in total.
Hi, I have a 5KVA 48V inverter, does it have a WI-FI capability that I can connect to remotely to see the power generation and consumption?
Hello,
Thank for contacting Gennex Technologies, we’ll like to confirm the version of the 5kVA being installed.
The 5kVA VMIII & Axpert King versions have wifi compatibility through the use of an external wifi adapter which have we have in stock.
The 5kVA Par A & Par B versions do not presently have wifi compatibility but can be monitored using a Sim enabled SMTP kit which we also have on stock
My inverter keeps beeping the alarm showing error 32
Hi. My Genex 5kva PPT inverter is giving error F05 and beeping. Please what can i do? Thank you
Hello Olalekan,
Kindly chat with our support team on WhatsApp (+2348171936361, +2348179462854). They will answer all your questions.
Thanks
The motherboard of my 5kva Gennex hybrid inverter is bad. How can I get a new board?
Hello Amaku, kindly reach us via call or WhatsApp: 08171936361, 08179462854
Hello GENNEX Engrs.
Pls my GENNEX inverter Controller is showing error 06.
What shd I do and how is ur coy going to help me out on it?
Hello Odunayo
Kindly get in touch with our team via call or WhatsApp for fast help. 08171936361, 08179462854
Thanks for choosing Gennex